Buy the floor# just come to SHUIMOJIANGNAN#

Wooden floor is the first choice for most home decoration because of its comfortable foot feel and natural fragrance. After a long time of trampling and use, and the influence of natural conditions, the floor will be more or less damaged. In order to keep the ground bright and avoid unnecessary expenses, the floor renovation can make the ground look new.

1. The performance of the old floor is stable

Floor renovation refers to the process of grinding, scraping, painting, waxing and polishing the surface of the floor to make the old floor look new. The cost of this method is lower than that of repurchasing a new floor, and the performance of the old floor has been stabilized due to long-term use, and the environmental protection performance is better than that of the new floor.

2. Poor maintenance needs to be refurbished

The refurbishment time of the floor has a lot to do with the maintenance intensity. If you usually pay attention to the maintenance of the floor, there are no major problems, and there is no obvious damage even after many years of use, then there is no need to renovate; if you do not pay attention to the maintenance of the floor, there are floor problems such as peeling and cracking Renovate as soon as possible. If it is not dealt with in time, the problem of the floor will become more and more serious. In the end, the floor can only be replaced.

3. What floor can be refurbished?

After the three types of floors of solid wood floor, solid wood composite floor and bamboo wood floor are damaged, renovation measures can be taken, but the premise is that the surface layer of the floor reaches 4 mm. If the surface of the floor is too thin, the middle layer will be ground out during sanding, which will affect the service life of the floor.

Laminate flooring is not recommended for refurbishment. First, the price is low, and the price difference between refurbishment and repurchase is not much different. Second, the surface layer of laminate flooring is the hardest part. During refurbishment and grinding, the surface wear-resistant layer will be destroyed, exposing the glue in the middle. layer, it is easy to cause the floor to age.

4. If the damage is serious, replace it directly

Not all floors with problems can be refurbished, and floors with serious damage such as mildew and deformation can only be replaced directly. Floor mildew generally penetrates into the interior of the floor, grinding can only remove the surface, and mildew exists inside the floor; floor deformation cannot be solved by grinding. If the floor has a large area of mildew and deformation, it is recommended to buy a new floor for laying.

5. Partial renovation is not advisable

Floor renovation is not recommended for partial renovation. The overall renovation effect of the floor in a space is better, and the effect of the new floor can basically be achieved. Partial renovation will cause the difference between the old and new floors in a unified space. The longer the time is, the more obvious the difference will be, which is not conducive to the overall beauty of the home.